8 Best Parquet Flooring Specialists in Singapore (July 2026)

Before you compare companies, settle what you are actually buying, because it changes the price, the durability and even which type of specialist you should be calling. With parquet there are three paths in a Singapore home, and they are not interchangeable.

Solid wood parquet is real timber all the way through, traditionally laid as teak or merbau strips in a herringbone or brick pattern. It is beautiful, it can be sanded and re-varnished many times over its life, and it is the classic look in older condos and landed homes. The catch is our climate: solid timber moves with humidity, so it can gap in the dry aircon months, cup after a spill and creak underfoot, which is exactly why so many owners end up restoring rather than replacing it.

Engineered wood is the modern answer to that problem. A real hardwood veneer, oak, teak or walnut, is bonded onto a stable plywood or HDF core, so you get genuine timber grain on top with far better resistance to warping, expanding and shrinking than a solid plank. It comes in wide boards as well as herringbone and chevron patterns, and for most flats wanting a new wood floor, it is the sensible choice. Restoration is the third path, and often the smartest one: if your existing parquet is structurally sound but scratched, faded or sticky, a specialist sands it back and re-varnishes it, which costs a fraction of a full replacement and keeps the original character.

One thing that trips people up is that these are frequently different businesses. Supply-and-lay timber houses sell and install new solid or engineered parquet, while parquet polishing and varnishing outfits specialise in reviving existing floors. A few do both, but many lead with one, so match the specialist to the job. And remember the HDB overlay reality: in most flats you generally cannot hack out the original floor finishes, so new wood usually goes down as an overlay, while restoration works with what is already there.

WoodFloor.com.sg, run by Ezzogenics, is the one I would point most people to first because it covers the whole parquet journey under one roof. It supplies and installs new parquet in Burmese teak, oak, walnut and maple, lays solid and engineered planks, and it also does the restoration side: board replacement, gap filling, sanding and re-coating for aged parquet. That breadth is rare, because most outfits lean either supply or restoration.

What I like is the finishing detail. It runs near dust-free sanding with vacuum equipment, and it offers both water-based and oil-based coatings, including premium Bona systems, so you can choose a matt, satin or gloss look and a low-odour finish for a family flat. If you want a single specialist who can honestly talk you through solid versus engineered, then either lay new boards or bring your old ones back to life, this is a strong starting point.

Website: woodfloor.com.sg
Location: Bartley Business Centre, Kaki Bukit Road 4, islandwide service
Best known for: One-stop supply, installation and restoration of solid and engineered parquet

Mr Wood Varnish is my pick when the job is restoration rather than a new floor. Its whole positioning is making old floors look new again, with over 16 years reviving scratched, stained, water-damaged and dull parquet through sanding and re-varnishing. This is the classic resale-flat scenario: the boards are fine, but decades of wear have left the surface tired, and a proper re-sand transforms it.

The details that matter to me are the dust-proofing and the guarantee. It runs advanced dust-proof sanding, which is the difference between a nightmare clean-up and a liveable one, and it backs the work with a 90-day touch-up guarantee. Alongside parquet it handles staircase sanding, engineered wood polishing and rental reinstatement packages, so it is a natural call for landlords and tenants restoring a floor at handover. For bringing an existing parquet back to life, this is the specialist I would trust.

Website: mrwoodvarnish.com
Location: Singapore, islandwide service
Best known for: Dust-proof parquet sanding and re-varnishing with a 90-day touch-up guarantee

If your heart is set on genuine solid timber, Sin Joo Lee Timber is where I would start. It is a long-standing timber supplier that stocks proper Burmese teak parquet, the species that has always been the benchmark for wood flooring here, in traditional 11mm strip sizes, and it advertises wholesale teak and parquet strips at competitive prices. For anyone chasing that authentic herringbone teak look, going closer to the source makes sense.

Beyond parquet strips it carries a wider timber range, including American White Oak, Indonesian Merbau, Chengal and Brazilian Ipe for decking, plus vinyl and SPC lines if you end up mixing materials across a property. Because it leans toward supply, it suits homeowners who already have a trusted installer or a renovation contractor handling the laying and simply want a solid, well-priced timber source. As with any solid wood buy, confirm the moisture handling and acclimatisation before installation. For real teak parquet at supplier pricing, Sin Joo Lee is a strong option.

Website: sinjoolee.com.sg
Location: Kranji Loop, TimMac @ Kranji
Best known for: Wholesale Burmese teak parquet strips and solid timber supply

Wood & Wood is the heavyweight on this list, with more than 30 years in the timber industry and operations spanning Singapore, Malaysia and Italy. It describes itself as manufacturers, retailers and craftsmen, which tells you the wood knowledge runs deep, and it supplies solid timber, engineered timber, decking, cladding and even acoustic and mass engineered timber for larger builds.

For a homeowner, the appeal is the depth of the range and the fact that architects and designers already specify them, so if you want a considered engineered wood floor with proper species and grain selection, this is a serious source. It leans supplier and craftsman rather than small-flat one-room installer, so it makes the most sense when your project has some scale or a designer is coordinating the specification. For a genuine, well-sourced timber floor, Wood & Wood earns its place here.

Website: woodandwood.com.sg
Location: Henderson Road, with regional operations
Best known for: Solid and engineered timber from a 30-year specialist supplier

Moods Floor is my pick for anyone who cares about pattern and provenance. It supplies engineered and solid wood flooring in teak, oak, walnut and exotic species, and importantly it does herringbone and chevron patterns, which is where a parquet floor stops being just a floor and becomes a design feature. If you have been saving photos of that classic herringbone look, this is a showroom to visit.

The provenance angle is genuine: it states that its engineered, reclaimed and solid wood all come from FSC and PEFC-certified manufacturers, and it offers surface effects like brushed, structured and distressed finishes for a more natural, less over-processed look. It sits at Tampines North Drive 1 in the T-Space building, so it is easy to compare ranges side by side. For a design-led parquet floor with certified timber and real pattern options, Moods Floor deserves a slot on your list.

Website: moodsfloor.com
Location: Tampines North Drive 1, T-Space
Best known for: Herringbone and chevron engineered wood with FSC and PEFC-certified timber

DW Floor Polishing is the other restoration specialist I rate, and a sensible second quote to line up against Mr Wood Varnish. It focuses on bringing floors back to pristine condition, covering parquet polishing, varnishing and repair alongside marble polishing and general wood floor refinishing, so it is squarely a restore-what-you-have outfit rather than a new-supply house.

What makes it handy is the breadth of surfaces under one roof: if your flat mixes tired parquet with marble that also needs polishing, you can hand both to the same team on the same visit, which saves coordinating two trades. It handles sanding, refinishing and damage repair, so scratched or stained boards are its bread and butter. For a straightforward parquet re-varnish, or a combined parquet-and-marble refresh before a tenancy or a sale, DW Floor Polishing is a solid call.

Website: dwfloorpolishing.com
Location: Lower Delta Road, islandwide service
Best known for: Parquet polishing and re-varnishing alongside marble restoration

Hardscapes is my premium-leaning pick for timber and engineered oak crafted specifically for the Singapore climate. It sits at the design-conscious end of the wood market and is the kind of supplier interior designers reach for when the brief calls for a warm, high-end oak or teak floor rather than a budget wood-look plank. Its parquet and engineered wood is chosen for sustainability and long-term performance in our humidity.

If you are doing a landed home, a higher-spec condo or a single statement room where the floor is the feature, this is where the extra spend shows. The trade-off is that engineered oak of this quality costs more than an everyday plank and rewards a bit of care, so it suits owners who want the real material done properly. For a considered wood floor with proper species selection, Hardscapes is a name I keep coming back to across my flooring shortlists.

Website: hardscapes.com.sg
Location: Singapore, islandwide installation
Best known for: Premium engineered oak and timber for design-led homes

Good Wood Carpentry rounds out the list as a supply-and-install specialist that carries both solid and engineered wood. It stocks solid Burmese teak and American White Oak, wide-plank engineered wood, and a hybrid engineered range with a real oak top layer and a clip-system install, and crucially it installs what it sells, so you get one point of accountability for the material and the laying.

Because it is a carpentry business at heart, it is comfortable with the joinery side of a wood floor, and its project portfolio spans residential and commercial work. That makes it a good fit if you want a real timber floor without splitting the job across a separate supplier and installer. As always with solid wood, ask about acclimatisation and expansion gaps for our humidity before committing. For a supply-and-lay parquet floor from a carpentry-minded team, Good Wood Carpentry is a fair pick to close the shortlist.

Website: sggoodwood.com
Location: Ubi Avenue 1, islandwide installation
Best known for: Supply-and-lay solid teak, oak and hybrid engineered wood

Prices move with the species and grade, the board size and pattern (herringbone and chevron cost more to lay than straight planks), how much subfloor prep is needed, and whether you are buying new supply-and-lay or a restoration. As a rule, restoring sound existing parquet is by far the cheapest way to get a fresh wood floor, engineered wood is the sensible new-floor value pick, and solid teak or merbau sits at the top. Always measure your area early and compare quotes on the same species, thickness and finish, because that is the only fair comparison.

1. Honest advice on solid versus engineered versus restoration. A good specialist asks about your flat, your budget and your existing floor, then steers you to restore, lay engineered or lay solid on the merits, rather than pushing their highest-margin line.
2. Dust-proof sanding. For any restoration, the difference between advanced dust-proofing and an open sander is a liveable job versus fine timber dust through your whole home, so I always ask how they contain it.
3. The right finish and coating. Water-based and oil-based varnishes behave differently on sheen, odour and durability, so a specialist who explains matt versus satin versus gloss and offers a low-odour option understands the product.
4. Honesty about HDB rules. In most HDB flats you generally cannot hack out the original floor finishes, and certain works need an HDB permit, so a good specialist steers you toward overlay for new wood and works with what you have for restoration. Check the current renovation guidelines on HDB before you commit.
5. Accountability in writing. Whether it is a supply-and-lay warranty or a restoration touch-up guarantee, I want the workmanship covered on paper, because installation and varnishing faults are where wood floors actually go wrong.

I am not a flooring company and nobody paid to be on this list. I built it the way I research any home-renovation category: reading through Google reviews, renovation forums and local guides, checking each specialist's live website for what it actually supplies or restores, and weighing the difference between a new-supply timber house and a parquet polishing outfit.

Prices, ranges and services shift over time, so treat the figures here as a guide rather than a quote, and confirm the current numbers, species, finishes and warranty terms with the company before you commit. My aim was simple: give you a shortlist I would genuinely use myself, sorted by where each one is strongest across supply, patterns and restoration.

Yes, and in most cases restoring is the smarter move than replacing. If your parquet boards are still firmly bonded and structurally sound, a specialist sands off the old varnish and the surface scratches, fills minor gaps, replaces any badly damaged boards, and applies fresh coats of varnish in your chosen sheen. The result looks close to a brand new floor for a fraction of the cost and mess of a full replacement, and it keeps the original character of an older flat. It only stops being worth it when a large share of boards are loose, water-swollen, termite-damaged or lifting, at which point a new overlay makes more sense. Because you generally cannot hack out HDB floor finishes, restoration works nicely within the rules, but confirm any permit needs on the HDB website first.

For most new floors in Singapore, engineered wood is the better everyday choice, and solid wood is the premium, character-driven option. Solid teak or merbau is real timber through and through, so it can be sanded and re-varnished many times over decades and has an unmatched depth of grain, but it moves with our humidity swings, which is what causes the classic gapping in dry aircon months and creaking underfoot. Engineered wood puts a real hardwood veneer over a stable plywood or HDF core, so you keep the genuine timber look on top while the board stays far more dimensionally stable, resisting the warping and shrinking that plague solid planks here. If you want the lowest-drama wood floor, go engineered. If you want a heritage solid floor and are prepared to maintain it, solid teak still has no equal.

They are often two different specialists, which surprises a lot of homeowners. An installation or supply-and-lay company sells you new solid or engineered parquet and lays it, so you go to them when you want a fresh floor. A restoration or polishing company does not usually sell new flooring at all: it sands, repairs and re-varnishes the parquet you already have, which is the job for a tired but sound existing floor. A handful of outfits do both under one roof, but many lead with one, so decide first whether you are replacing or reviving, then pick the specialist built for that. Sending a re-varnish job to a pure supplier, or asking a polishing outfit to source premium new teak, tends to end in a mismatch.

For a typical HDB flat, a full re-sand and re-varnish usually takes two to four days depending on the area, the condition of the boards and the number of varnish coats. The sanding itself is fast, but each coat of varnish needs drying time before the next, and the floor needs to cure before you walk on it or move furniture back, so plan to keep off it for the stated period. Dust-proof sanding keeps the mess down, but it is still a job to schedule when you can be out of that space. New engineered or solid parquet installation is often quicker per room but adds acclimatisation time, since the timber should sit in your home to adjust to the humidity before it is laid. Always confirm the timeline in writing and slot flooring toward the end of your renovation, after the dusty trades are done.