8 Best Epoxy Flooring Contractors in Singapore (July 2026)

Before you compare contractors, settle the system, because it changes the price, the performance and who you should even be calling. Industrial resin flooring is not one product, it is a family of them, and they are not interchangeable.

Standard epoxy coating is the workhorse: a hard, seamless, chemical-resistant film rolled or squeegeed over prepared concrete in a couple of coats, ideal for warehouses, workshops and general factory floors. Self-levelling epoxy is a thicker, poured build that flows out to a mirror-flat, joint-free surface, which is what you want for showrooms, cleanrooms and anywhere the look and the flatness both matter. PU, or polyurethane, is the flexible cousin. It is more scratch resistant, more UV stable so it yellows less, and it copes better with a slab that expands, contracts or gets hot, which is exactly why PU and PU-cement systems are the go-to for multi-storey carparks, cold rooms and heavy wet-process areas.

Epoxy flake throws decorative vinyl chips into the coat for a speckled, grippy, easy-to-hide-dirt finish that suits garages, showrooms and clinics. Anti-slip systems broadcast aggregate into the top coat for ramps and wet areas, and ESD or anti-static floors carry conductive layers that bleed away static charge, which is non-negotiable in electronics, semiconductor and some pharmaceutical spaces. There are also food-grade systems built to HACCP hygiene standards for kitchens and food factories. Decide which of these you actually need first, because a contractor who is brilliant at home garages is not automatically the one you want pouring a conductive cleanroom floor.

Polymer International is the one I would point most industrial jobs to first, because it is a dedicated protective floor coating specialist rather than a painter who also does epoxy. It has been working across Singapore, Malaysia and Indonesia since 1989, and it covers both epoxy and polyurethane systems in depth, which is exactly the breadth you want when the honest answer to your project might be PU rather than the epoxy you walked in asking for.

What I like is the range across the hard-industrial end: chemical-resistant epoxy, self-levelling systems, ESD and anti-static floors, and PU-cement for heavy wet-process and thermal-shock areas. That is the profile of a company that lives in factories, warehouses and plants, not showrooms. If you have a demanding slab, need a system matched properly to the chemicals and traffic it will take, and want a specialist who can argue epoxy versus PU on the merits, Polymer International is a strong starting point.

Website: polymer-international.com
Location: Singapore, serving Malaysia and Indonesia
Best known for: Specialist epoxy and PU protective floor coatings for heavy industry since 1989

Trion Industrial Services is my pick when the floor has to do a technical job, not just look clean. It runs the full industrial range, epoxy and PU coatings, self-levelling epoxy, chemical-resistant systems and, importantly, anti-static and ESD floors for cleanrooms, electronics and electronics warehousing, which is specialist territory a lot of general contractors quietly avoid.

It serves factories, warehouses and chemical plants alongside food and beverage manufacturers, laboratories and aerospace facilities, and it carries BizSafe certification, which is the kind of workplace-safety credential you want to see before anyone grinds and coats an operating facility. If your requirement is a controlled environment with real static, chemical or temperature demands, Trion is the contractor I would shortlist for a proper technical spec rather than a generic coat of paint.

Website: trionscvs.com
Location: Singapore, serving factories, warehouses and chemical plants
Best known for: Anti-static and ESD epoxy floors for cleanrooms and electronics

Epont Kossan Chemicals is the name I would flag when the floor has to pass a hygiene or compliance test. Established in 1990, it manufactures its own resin and cementitious coating range and applies it too, which is a genuine advantage because the people specifying the system are the people who make it. The line covers standard and chemical-resistant epoxy, PU, ESD floors, carpark systems and hygienic, food-safe coatings.

What sets it apart for me is the credential stack behind those food and hygiene claims: it holds HACCP International food-safety certification, ISO 9001 and ISO 45001, and it is a BCA-registered contractor, which is exactly the paperwork you want when a floor has to satisfy an auditor as well as a forklift. If you run a food factory, a central kitchen, a pharmaceutical space or a carpark deck and you need the coating to be provably compliant, Epont is the one I would call.

Website: epontcoatings.com
Location: Singapore, islandwide industrial coverage
Best known for: Food-grade HACCP coatings and manufacturer-applied epoxy and PU systems

Asset Protection Services is the specialist I would trust with a static-sensitive floor above anyone else on this list. It focuses almost entirely on ESD and anti-static flooring, conductive epoxy and cleanroom systems, and it works to the standards that actually matter in that world, ANSI/ESD S20.20, IEC 61340-5-1 and SEMI, with conductive systems engineered to control resistance to the levels those specs demand.

Operating since 2011 out of NorthPoint Bizhub in Yishun, it serves semiconductor and electronics manufacturers, data centres and R&D facilities, and its client list runs to names like Micron and Keppel, which tells you it is trusted with genuinely demanding high-tech environments. It is BizSafe Level 3 certified too. If you are protecting sensitive electronics and a random general epoxy floor simply will not do, Asset is the narrow specialist I would put at the top of the shortlist.

Website: asset.sg
Location: NorthPoint Bizhub, Yishun Industrial Street 1
Best known for: ESD, anti-static and cleanroom flooring for semiconductor and data-centre facilities

Corrosion Proof Construction, or CPC Asia, earns its place for the messy, aggressive environments most contractors would rather not quote. Its focus is protective coating and flooring where the slab takes a chemical, thermal or wet-process beating, spanning epoxy and PU floor coatings, food and beverage flooring, pharmaceutical and wet-processing areas, and garage floor epoxy at the lighter end.

That corrosion-and-chemistry angle is the differentiator. It is the profile of a company set up to protect concrete and steel from attack, not just to make a floor shine, which is why food, pharma and industrial-process clients gravitate to it. If your floor has to survive constant washdown, spills, hot liquids or corrosive chemicals rather than just forklift traffic, CPC Asia is the specialist I would bring in to spec the right protective system.

Website: cpcasia.com
Location: Singapore, industrial and process facilities
Best known for: Food and beverage, pharmaceutical and wet-process PU and epoxy coatings

Luminous Engineering is the all-rounder I would suggest when a job straddles home and light-commercial rather than heavy industry. It runs residential and commercial epoxy coating across HDB flats, condos, landed homes, offices, warehouses and garages, and it handles epoxy repair and refinishing as well, so it is a sensible call when you want an existing floor rescued rather than replaced.

It is based at Roberts Lane and services the island widely, and beyond flooring it offers a broader renovation and handyman scope, which can be convenient if the epoxy floor is one line item in a larger refresh. For a garage, a shop unit, a small workshop or a light-commercial space where you want a clean, durable epoxy finish without the full heavy-industrial spec, Luminous is an easy, flexible shortlist entry.

Website: luminousengineering.com.sg
Location: Roberts Lane, islandwide service
Best known for: Residential and light-commercial epoxy coating, repair and refinishing

Esperto Paintworks is my pick when you want the reassurance of a warranty and a clear process on a smaller job. It covers residential, commercial and industrial epoxy flooring, and it puts a 12-month workmanship warranty on every project, which matters in a trade where the coating can look perfect on day one and lift months later if the prep was skipped.

Encouragingly, it lists mechanical sanding as standard preparation, which is the right instinct, because grinding the concrete to a proper profile is exactly what makes a coating bond and last. It has picked up the Singapore SME 500 and Entrepreneur 100 awards, and it offers free on-site consultation and quotation, so you can get a real measured price rather than a guess. For a garage, a retail unit or a light industrial floor where you want the job documented and warranted, Esperto is a solid, homeowner-friendly choice.

Website: espertopaintworks.com
Location: Singapore, residential, commercial and industrial
Best known for: Epoxy flooring with a 12-month workmanship warranty and mechanical-sanding prep

Galaxy Painters rounds out the list as the well-reviewed choice for decorative and residential-leaning epoxy work. It combines epoxy flooring with painting and coating across residential, industrial and commercial properties, and it is the one to know if you want the finish to look good, not just perform, with anti-slip options and metallic epoxy coatings among its solutions.

It works out of Ubi Techpark and holds a 4.6-star Google rating across its reviews, which is a healthy sign for a coating contractor, and it is listed as an approved applicator for Nippon Paint. Reviewers tend to single out the professionalism, tidy finish and punctual completion. For a garage, a showroom or a home space where you want a decorative metallic or flake epoxy floor from a contractor with a visible track record, Galaxy Painters is a fair pick to close out the shortlist.

Website: galaxypainters.sg
Location: Ubi Techpark, Ubi Crescent
Google Rating: 4.6 stars (14 reviews)
Best known for: Decorative metallic and flake epoxy, anti-slip coatings for homes and showrooms

Prices move with the system, the coating thickness in millimetres, the number of coats, the condition of the existing concrete and how much grinding, patching and moisture control the slab needs before anything goes down. Two things skew the numbers. A small residential garage or balcony almost always carries a minimum job charge, so the per-square-foot rate looks high on a tiny area, while a large industrial warehouse floor drops to the lower end of each band because the setup cost spreads across thousands of square feet. Always get a measured site quote on the exact system and thickness you need, because a cheap headline rate on thin, under-prepared epoxy is the most expensive floor you can buy once it starts peeling.

1. Serious surface preparation, in writing. This is the whole game. A good contractor diamond-grinds or shot-blasts the concrete to a proper profile, fixes cracks and checks the slab for moisture before coating, because a resin floor is only ever as strong as its bond to the concrete. If the quote does not mention mechanical prep, walk away.
2. The right resin for the room. A specialist recommends epoxy, PU, self-levelling, flake, anti-slip or ESD based on your traffic, chemicals, temperature and hygiene needs, rather than pushing the one system they always install.
3. Thickness and coats stated clearly. For industrial floors, ask for the film thickness in millimetres and the number of coats, because that, more than the brand name, decides how the floor wears under forklifts and pallet jacks.
4. Sector-specific credentials where it matters. Food, pharmaceutical and electronics floors are specialist work, so look for HACCP food-safety certification, ESD standards compliance and good-industry practice. You can reference finishes and workmanship standards on BCA, and a BCA-registered contractor is a reassuring sign on a larger commercial or industrial job.
5. A workmanship warranty and honest downtime. I want the labour covered, not just the product, and I want a straight answer on curing time and how long the floor is out of use, because a coating rushed back into service before it cures is a coating that fails early.

I am not an epoxy flooring company and nobody paid to be on this list. I built it the way I research any industrial or building-services category: reading through company websites, reviews and local guides, checking what each contractor actually installs and which sectors it serves, and weighing a heavy-industrial coating specialist differently from a residential garage painter.

Prices, ranges, ratings and certifications shift over time, so treat the figures here as a guide rather than a quote, and confirm the current system, thickness, warranty and credentials with the contractor before you commit. My aim was simple: give you a shortlist I would genuinely use myself, sorted so the heavy-industry and specialist contractors sit up top and the home and light-commercial options follow.

Neither is universally better, they are built for different jobs, so the honest answer is that it depends on the room. Epoxy is harder and gives you a rigid, seamless, chemical-resistant surface with that classic glossy showroom look, which makes it the default for warehouses, workshops and general factory floors. PU, or polyurethane, is more flexible and more scratch resistant, it handles a slab that expands, contracts or gets hot far better, and it is more UV stable so it yellows less in daylight. That flexibility and thermal tolerance is why PU and PU-cement systems dominate multi-storey carparks, cold rooms and heavy wet-process areas. A good contractor will ask about your traffic, chemicals, temperature swings and sunlight before telling you which resin to use, and sometimes the right answer is an epoxy body with a PU top coat to get the best of both.

Because a resin floor is only ever as good as its grip on the concrete underneath, and that grip is created during preparation, not application. Bare concrete has a smooth, sealed, sometimes contaminated surface that coating will not bond to properly, so a proper contractor mechanically opens it up by diamond grinding or shot-blasting to a rough profile, then repairs cracks, fills pinholes and checks for moisture rising through the slab. Skip that step, roll epoxy straight onto a swept floor, and the coating may look perfect for a few months before it peels, bubbles or flakes off in sheets under traffic. When you are comparing quotes, the one that spells out the grinding and prep is usually the one that lasts, even if it is not the cheapest number on the page.

For a straightforward standard epoxy coating, the application itself is often one to three days depending on the area, the number of coats and how much grinding and patching the slab needs first. The catch is curing. Most epoxy systems need roughly 24 hours before light foot traffic and around seven days before full chemical resistance and heavy loads like forklifts, so plan the downtime honestly rather than rushing the floor back into service. Self-levelling and thicker builds, and jobs that need moisture treatment on the slab, take longer. For an operating facility, a good contractor will phase the work zone by zone and schedule around your operations, which is exactly why a company used to industrial sites is worth more than a general painter on a live floor.

Yes, and it is one of the most popular residential uses, along with balconies, utility areas and store rooms. Epoxy flake and decorative or metallic epoxy finishes are hard-wearing, easy to clean and hide dirt and hairline cracks well, which suits a home garage or workshop nicely. The main thing to know is pricing: because the areas are small, most contractors apply a minimum job charge, so the per-square-foot rate on a tiny balcony will look high compared with a big industrial floor. It is still usually good value for how long it lasts, but get a measured quote, confirm the prep and curing time, and remember that if the space sees direct sun a PU top coat resists yellowing better than plain epoxy.